Table of Contents
Advertisement
GETTING STARTED
Rear Head Restraints
The rear seats are equipped with adjustable head restraints, the outboard head restraints
have two comfort positions, while the central head restraint have to use in the raised
position. When there are no occupants in the center seat, the head restraint can be low-
ered for maximum visibility for the driver. When the center seat is being occupied, the
head restraint has to be in the raised position.
NOTE:
If the center rear head restraints requires removal, see your authorized dealer.
To raise the outboard head restraints, pull upward on the head restraint. To lower the
head restraints, push the adjustment button located at the base of the head restraint, and
push downward on the head restraint.
To remove the outboard head restraints, raise it as far as it can go then push the adjust-
ment button, and the release button at the base of each post while pulling the head re-
straint up. To reinstall the head restraint, put the head restraint posts into the holes and
push downward. Then adjust it to the appropriate height.
A loose head restraint thrown forward in a collision or hard stop could cause serious
injury or death to occupants of the vehicle. Always securely stow removed head re-
straints in a location outside the occupant compartment.
For proper routing of a Child Seat Tether, refer to "Occupant Restraints" in "Things to
Know Before Starting Your Vehicle" in your Owner' s Manual on the DVD for further
details.
ALL the head restraints MUST be reinstalled in the vehicle to properly protect the oc-
cupants. Follow the re-installation instructions above prior to operating the vehicle or
occupying a seat.
22
WARNING!
WARNING!
Advertisement
Table of Contents
