Table of Contents
Advertisement
Voice Command Tips
•
Speaking complete names (i.e; Call John Doe vs. Call John) will result in greater system
accuracy.
•
You can "link" commands together for faster results. Say "Call John Doe, mobile, " for
example.
•
If you are listening to available voice command options, you do not have to listen to
the entire list. When you hear the command that you need, push the
on the steering wheel, wait for the beep and say your command.
Changing The Volume
•
Start a dialogue by pushing the Phone button
"Help."
•
Use the radio VOLUME/MUTE rotary knob to adjust the volume to a comfortable
level while the Uconnect system is speaking. Please note the volume setting for
Uconnect is different than the audio system.
NOTE:
To access help, push the Uconnect Phone button
"help." Press the display or press either the Phone
"cancel" to cancel the help session.
Incoming Text Messages
After pairing your Uconnect system with a Bluetooth enabled mobile device with the
Message Access Profile (MAP), the Uconnect system can announce a new incoming text
message and read it to you over the vehicle' s audio system.
NOTE:
Only incoming text messages received during the current ignition cycle can be viewed/
read.
To enable incoming text messaging:
iPhone
1. Press the settings button on the mobile phone.
2. Select Bluetooth.
NOTE:
Ensure Bluetooth is enabled, and the mobile phone is paired to the Uconnect system.
3. Select
located under DEVICES next to Uconnect.
ELECTRONICS
, then say a command for example -
on the steering wheel and say
or VR
button and say
button
87
Advertisement
Table of Contents
