Decorative Stitching - Brother 885-E35 Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

• When lowering the presser foot, do not push

in the front of the presser foot, otherwise the

bar tack will not be sewn with the correct size.

1 Do not reduce the gap.

Pull down the buttonhole lever as far as

possible.

1 Buttonhole lever

2 Bracket

The buttonhole lever is positioned behind the

bracket on the buttonhole foot.

Gently hold the end of the upper thread in

your left hand, and then start sewing.

Once sewing is completed, the machine

automatically sews reinforcement stitches,

then stops.

Raise the needle and the presser foot lever,

remove the fabric, and cut the thread.

Raise the buttonhole lever to its original

position.

Memo

• If the fabric does not feed, for example, because it

is too thick, increase the stitch length. For details,

refer to "Selecting a stitch" (page 25).