Using Your Sewing Machine; Power Supply Precautions; Power Supply; Foot Controller - Brother 885-E35 Operation Manual

USING YOUR SEWING
MACHINE

Power supply precautions

Be sure to observe the following precautions
concerning the power supply.
WARNING
• Use only regular household electricity for the
power source. Using other power sources may
result in fire, electric shock, or damage to the
machine.
• Make sure that the plugs on the power cord
are firmly inserted into the electrical outlet
and the power supply jack on the machine.
Otherwise, a fire or electric shock may result.
• Do not insert the plug on the power cord into
an electrical outlet that is in poor condition.
• Turn off the main power and remove the plug
in the following circumstances:
· When you are away from the machine
· After using the machine
· When the power fails during use
· When the machine does not operate
correctly due to a bad connection or a
disconnection
· During electrical storms
CAUTION
• Use only the power cord included with this
machine.
• Do not use extension cords or multi-plug
adapters with many other appliances plugged
in to them. Fire or electric shock may result.
• Do not touch the plug with wet hands. Electric
shock may result.
• When unplugging the machine, always turn off
the main power first. Always grasp the plug
to remove it from the outlet. Pulling on the
cord may damage the cord, or lead to fire or
electric shock.
• Do not allow the power cord to be cut,
damaged, modified, forcefully bent, pulled,
twisted, or bundled.
Do not place heavy objects on the cord. Do
not subject the cord to heat. These things may
damage the cord and cause fire or electric
shock. If the cord or plug is damaged, take the
machine to your authorized dealer for repairs
before continuing use.
• Unplug the power cord if the machine is not to
be used for a long period of time. Otherwise a
fire may result.
KNOWING YOUR SEWING MACHINE

Power supply

1
Insert the plug into a wall outlet.
2
1
2
Set the main power switch to "I".
The sewing light comes on when the
X
machine is turned on.
Memo
• When the machine is turned on, the needle
and the feed dogs will make sound when
they move; this is not a malfunction.
3
To turn off the machine, set the main power
switch to "".
X The sewing light goes off when the machine
is turned off.
Note
• If a power outage occurs while the sewing
machine is being operated, turn off the sewing
machine and unplug the power supply cord.
(For U.S.A. only)
• This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not modify the
plug in any way.

Foot controller

Insert the foot controller plug into its jack/socket.
1 Main power
switch
2 Jack/socket
connector
1 Foot controller jack/socket
9
1