Step 3 - Connecting The Speakers To The Receiver - Insignia NS-HURSK18 User Manual

OPTION 2
Sound bar
1 Connect one end of the 3.5 mm audio cable (included) to the aux out jack
of the transmitter.
2 Connect the other end of the 3.5 mm audio cable to the RCA to 3.5mm
adapter (included), then connect the other end to the soundbar.

Step 3 - Connecting the speakers to the receiver

1 Connect one end of the speaker wires (included) to the jacks on the back
of the speakers, black/red for right channel and grey/red for left channel.
2 Connect the other end of the speaker wires to the SPK-L (left speaker) and
SPK-R (right speaker) jacks on the back of the receiver, black/red for right
channel and grey/red for left channel speakers.
Left speaker
14
3.5 mm to RCA
adapter (included)
Back of the receiver
www.insigniaproducts.com
NS-HURSK18
Back of the transmitter
3.5 mm cable
(included)
Right speaker