Transmitter - Insignia NS-HURSK18 User Manual

Transmitter

# ITEM
1 Optical indicator LED
2 AUX indicator LED
3 (power) button
4 (source) button
5 - (volume down)
6 + (volume up)
7 Dolby indicator LED
8 PCM indicator LED
9 IR sensor
10 Power indicator
11 DC IN jack
Back view
DESCRIPTION
Lights when using an optical (TV or DVD) sound source (default).
Lights when using an AUX (tablet or mobile device) sound source.
Press to turn on the transmitter. Press again to put the transmitter into standby
mode.
Press to toggle between the optical and aux sound sources.
Press (source) and - (volume down) to lower the rear speaker volume.
Press - (volume down) only to lower the master volume.
Press (source) and + (volume up) to raise the rear speaker volume.
Press + (volume up) only to raise the master volume.
Lights when the audio has Dolby 5.1 content.
Lights solid when PCM audio is being received. Blinks when the format is not
supported (for example, DTS).
Aim the remote control at this sensor to control the transmitter.
- Solid Red when the transmitter is in standby mode.
- Blinks slowly when the transmitter is muted.
- Turns off when the transmitter is turned on.
- Blinks when adjusting volume. Blinks rapidly when the maximum or minimum
sound level is reached.
- Blinks when adjusting delay time. Blinks rapidly when the maximum or
minimum delay time level is reached.
Connect the 5V 1A AC adapter to this jack to power the transmitter.
www.insigniaproducts.com
Universal Rear Speaker Kit
7