Setting Up And Connecting Your Sound Source - Insignia NS-HLPS5018 User Manual

Charging the batteries
Your speaker system comes with built-in rechargable batteries so you can
use it in places without an AC connection. The batteries are charged
automatically when you plug your speaker system into an AC power
outlet.
To determine the current charge level of your batteries (except when your
speaker system is being charged), press the Battery Level button on the
side of your speaker system. The charge is indicated by the LEDs below
the button.
• If one LED lights, the charge level is 25%
• If two LEDs light, the charge level is 50%
• If three LEDs light, the charge level is 75%
• If all four LEDs light, the batteries are fully charged

Setting up and connecting your sound source

FM Tuner
1 Turn on your speaker system.
2 Press the SOURCE button on the speaker system repeatedly to select
"TUNER".
Bluetooth
Before you can use your speaker system with a Bluetooth device, you need to
pair your device to the speaker system.
Pairing your devices
1 Turn on your speaker system.
2 Place the Bluetooth device within 30 ft. (10 m) of your speaker system.
3 Press the SOURCE button on the speaker system repeatedly to select
"BT". This puts your speaker system into pairing mode.
Note
When your speaker system is plugged into an AC
power outlet or the batteries are charged, you can
charge a USB device by plugging the device into the
USB "B" port on the top of your speaker system.
Battery charge level button
Battery charge level indicator LEDs
www.insigniaproducts.com
Rugged Speaker System XL
7