Switching On/Off Frequency Selections; Saving A Configuration - Vivax vLoc-9800 User Handbook Manual

4 MyLocator2
4.6

Switching On/Off Frequency Selections

1. Click on the "Frequencies" tab. A screen similar to the one below should be shown.
2. Each row is color coded:
Grey indicates that frequency is not selected for either the menu or the frequency key.
•
White indicates that the frequency will be active in the locator menu but has not been selected to
•
show on the frequency key. (Note that it is still possible to make this frequency available on the
locator by selecting it in the locator frequency menu.
Green indicates that the frequency will be available both in the locator menu and frequency select
•
key.
Blue shows active line.
•
3. Make the selections required.
4. Clicking on the "Send Cfg" icon will send the configuration to the locator.
4.7

Saving a Configuration

Having created a configuration it is possible to save this for future use.
To save a configuration:
1. Click on the "Save Cfg" icon.
2. Browse to a desired file location.
3. Create a name for that file, the extension will be: filename.vmcfg.
4. Press "Save" in the window.
To retrieve the file:
1. Click on the "Open Cfg" icon and browse to select the desired file.
2. Click on "open" in the window.
3. The file will populate the MyLocator2 screen automatically with the settings from the configuration file.
Page 19