Table of Contents
Advertisement
4
MyLocator2
4.5
Switch On/Off User Menu Settings
1. With the locator switched on and connected to the host computer click on the "Menu Settings" tab.
2. A screen similar to the one below should be shown. If not, click on the "Get Cfg" icon on the top bar. This
will load the configuration of the connected locator to the host pc.
3. Check the boxes that are required to be made available.
4. Click on the pull down menu and select the settings required.
5. Clicking on the "Send Cfg" icon will send the configuration to the locator.
Page 18
Advertisement
Table of Contents
