Table of Contents
Advertisement
3
vLoc-9800 Receiver
3.3
vLoc-9800 Receiver Display
The vLoc-9800 has two operational displays, "Left/Right" and "Peak Detect".
Left/Right Display
1
Sensitivity Setting
2
Auto/Manual/Sonde Indicator
3
Frequency
4
Speaker Volume
5
Battery Level
6
Signal Strength Bar Graph
7
Moving Pointer
3.4
Locating Mode (Response)
The vLoc-9800 receiver has an array of antennas; these can be toggled through different configurations
(modes) to provide different responses to the signals radiating from the buried pipes and cables. The modes
are:
3.4.1
Auto Left/Right Mode
The Left/Right Auto mode is ideal when tracing long distance lines in less congested sites. It requires no user
input to the keyboard allowing the operator to concentrate more on the safety of the surroundings.
Peak Detect Display
8
Signal Strength
9
Mode Select, Auto/Peak/Sonde
10
Increase Sensitivity
11
Change Frequency
12
Information Key (selects depth screen for
instance)
13
Reduce Sensitivity
14
On/Off Switch
Page 8
Advertisement
Table of Contents
