Table of Contents
Advertisement
INSPECTION AND MAINTENANCE
• Inspection and much of the maintenance can be done by the
operator. It may be necessary to review the installation and operating
instructions.
• Periodically inspect the cover assembly and the condition of all parts.
Check for loose bolts and parts, tighten if needed. Test the operation
to ensure that the parts are functioning properly and that the cover is
in top operational condition.
• If latch has been damaged, replace with new one. NOTE: Inspection
and/or maintenance should also be performed anytime a malfunction
is observed or suspected. If you need assistance inspecting and/or
servicing your cover, or if you want to order a replacement part, call
the customer service number on the back page. Always use original
equipment replacement parts for your cover.
SAFETY INFORMATION
• Do not cover cargo that is higher than the cover.
• Do not place object(s) on or against the cover or its framework at any time.
• Always secure cargo so it cannot shift and damage the cover or its parts.
• Do not use the cover's framework to tie down cargo.
• Never stand, sit or ride on the cover or allow others to do so.
• Do not leave valuables in an unattended vehicle as cover does not prevent
theft of cargo in truck box.
• The cover does not eliminate moisture and dust from entering the truck
box. Special wrappings or packaging of the cargo may be necessary.
• Due to poor ventilation, if you allow a pet/animal in the box, leave cover
open. Do not allow people or animals to occupy box with the cover closed.
• When towing vehicle backwards, cover must be rolled fully open and
secured with safety straps or fully closed and secured.
• ALWAYS finish securing the cover by sealing sides.
• Use caution when operating cover in windy conditions.
• Periodically check and/or retighten clamp and front bar tensioning
bolts as needed.
• Periodically check AUTOLATCH
engage side rails.
II cord to ensure latches fully
TM
11 11
Advertisement
Table of Contents
