Table of Contents
Advertisement
INSPECTION AND MAINTENANCE
• Inspection and much of the maintenance can be done by the operator. It may be necessary to review
the installation and operating instructions.
• Periodically inspect the cover assembly and the condition of all parts. Check for loose bolts and parts
and tighten if needed. Test the operation to ensure that the parts are functioning properly and that
the cover is in top operational condition.
• If latch has been damaged replace with new one. NOTE: Inspection and/or maintenance should
also be performed anytime a malfunction is observed or suspected. If you need assistance inspecting
and/or servicing your cover, or if you want to order a replacement part, call the customer service number
on the back page. Always use original equipment replacement parts for your cover.
• Vinyl cover can be treated with water base vinyl protectants. Avoid silicon base products.
• When cleaning, for best results use mild liquid soap and water. Never clean with petroleum or citrus
based products.
TONNEAU COVERS
CAR ACCESSORIES
Advertisement
Table of Contents
