Mixing, Fillingand Calibration - Micron Herbi-4 CDA Instruction Manual

MIXING, FILLINGAND CALIBRATION

Mixing and filling is generally the most hazardous process in the spraying operation.
follow the label instructions.
Always
and use a funnel if filling a container with a small neck.
area to be treated thereby avoiding the need for disposal of unused spray mix.
wear gloves when handling
Always
agrochemicals and equipment.
wash off any skin
Always
contamination.
With the HERBI-4 herbicides are usually applied in around 20 litres total spray
volume per hectare, except for glyphosate which can be applied at volumes as low as
10 litres per hectare. These are lower volumes than recommended for high volume
application with knapsack sprayers.
use a filter (fitted in the
Always
Only mix enough spray for the
use the correct equipment when
Always
mixing and measuring.
clean all equipment after use.
Always
4
ST backpacks
)