Storage, Recharging And Maintaining The Battery - Micron Herbi-4 CDA Instruction Manual

Hide thumbs Also See for Herbi-4 CDA:
Table of Contents

Advertisement

3. After working with agrochemicals, or handling spraying equipment,
thoroughly wash hands and exposed skin. All protective clothing should be washed
separately from other clothing and stored. Contaminated gloves should be washed
inside and out.
STORAGE
Before storing the HERBI-4, clean all the electrical contacts with wire brush or
similar. The machine should be stored in a dry cool place.
RECHARGINGAND MAINTAINING THE BATTERY (DIAGRAM 2)
i. Connect the battery charger male
connector
and lock the both connectors.
5
ii. The tank's switch
3
iii. Connect the battery charger plug to the main electric power and switch on. The Red
static 'in charging' and the red blinking 'done charging' indicator will glow. The
battery will need to recharge for 8 hours.
iv. After done with charging, remove the battery charger
power and disconnect the 3-pole connector.
3-pole connector to the tank female 3-pole
6
should be in
position.
ON
11
always
from the main electric
6

Advertisement

Table of Contents
loading

Table of Contents