Using Your Blender - Hamilton Beach 58800 Manual

Using Your Blender

IMPORTANT: Your blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or
cracks. Always inspect cutting blade assembly for broken, cracked, or loose blades. If jar or cutting blade assembly is damaged, do not use.
Call our toll-free customer service number to obtain replacement parts.
1
Place blender jar on base.
5
Press START.
6
840262103 ENv06.indd 6
2
Fill by opening lid. Add
ingredients.
FOR HOT LIQUIDS
3
Place lid on jar. Plug in blender.
NOTE: Do not blend hot liquids
for more than 3 minutes when
using a variable speed. Allow
blender to cool between each
use.
4
Turn variable speed control
knob from (OFF) to 1.
WARNING
Burn Hazard.
When blending hot liquids,
remove filler-cap of two-piece
lid. Do not exceed the 6-cup
(1420-ml) level. Hot liquids may
push off two-piece lid during
blending; therefore, with the
protection of an oven mitt or
thick towel, place one hand on
top of the lid, keep exposed
skin away from the lid, and start
blending at lowest speed.
11/9/2016 10:33:45 AM