Tripp Lite SmartOnline Owner's Manual page 7

2. Installation
UPS Unit State when asserting EPO without AC line power:
LEDs
OFF
To restart the UPS unit after asserting EPO without AC line power:
1. Verify that the EPO assertion has been removed or cleared.
2. Reapply AC line power to the UPS unit. Now the UPS will start back up in Standby mode.
3
External Battery Connection
4 Accessory Card Slot
The slot accommodates an optional internal
accessory card (model: WEBCARDLX, sold
separately). WEBCARDLX provides an
Ethernet network interface for remote
monitoring and control of the UPS system via
SNMP , Web or telnet. WEBCARDLX enables
remote reboots, shutdowns, load monitoring,
condition reporting and more. Use
WEBCARDLX with an optional environmental
sensor (model E2MT, E2MTDI, E2MTDO and
E2MTHDI, sold separately) to monitor
temperature and humidity or to control and
monitor alarms and security systems.
Remove the cover panel from the slot to
insert the accessory card. Refer to the
WEBCARDLX documentation for additional
installation instructions.
17-06-040-932882.indb 7
Output Fans
OFF OFF
Serial SNMP
OFF OFF
3
Some models may differ.
4
Some models may differ.
7
USB
OFF
6/29/2017 10:33:26 AM