Removing And Reinstalling The Main Parts - Sharp CD-XP160W Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION
Perform steps 1 to 6 and 9 of the disassembly method to
remove the tape mechanism.
How to remove the record/playback and erase
heads (TAPE 1) (See Fig. 7-1)
1. When you remove the screws (A1) x 2 pcs., the record/
playback head can be removed.
2. Move the hooks (A2) x 2 pcs., toward the center position as
shown in Fig. 7-1 and then lift the erase head.
How to remove the playback head (TAPE 2)
(See Fig. 7-2)
1. When you remove the screws (B1) x 2 pcs., the playback
head can be removed.
How to remove the pinch roller (TAPE 1)
(See Fig. 7-3)
1. When you remove the screw (C1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the pinch roller (TAPE 2)
(See Fig. 7-3)
1. When you remove the screw (D1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the motor (See Fig. 7-4)
1. Remove the belt.
2. Remove the screws (E1) x 6 pcs., to remove the motor
bracket.
3. Remove the screws (E2) x 3 pcs., to remove the motor.
How to remove the belt (TAPE 1)
(See Fig. 7-5)
1. Remove the main belt (F1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (F2) x 1 pc.
How to remove the belt (TAPE 2)
(See Fig. 7-5)
1. Remove the main belt (G1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (G2) x 1 pc.
Motor
TAPE 2
Main Belt
(G1)x1
TAPE 2
Main
FF/REW
Belt
Clutch Ass'y
(G1)x1
FF/REW
Belt
Main
(G2)x1
Belt
(F1)x1
Figure 7-5
TAPE 1
Main Belt
(F1)x1
TAPE 1
Motor
FF/REW
Belt
FF/REW
(F2)x1
Clutch Ass'y
– 7 –
(A1)x1
ø2x7mm
(A1)x1
ø2x3mm
Hook
(A2)x2
Erase
Head
Figure 7-1
(B1)x1 (B1)x1
ø2x6mm ø2x6mm
Figure 7-2
TAPE 1
(C1)x1
ø2x4mm
Pinch Roller
Figure 7-3
Motor
(E1)x2
ø2x4mm
Motor
Figure 7-4
CD-XP160W
TAPE 1
Record/Playback
Head
TAPE 2
Playback
Head
TAPE 2
(D1)x1
ø2x4mm
Pinch Roller
(E1)x2
ø2x4mm
(E1)x2
ø2x4mm
Motor
Bracket
(E2)x3
Special Screw
Motor
Bracket