Table of Contents
Advertisement
Section 3: Actuator Power Operation
June 2012
Section 3: Actuator Power Operation
3.1
Fully open the M11S-S by-pass control valve (30).
NOTE:
The valve is located on the right hand side of the M11S-S control module.
CAUTION: DO NOT EXCEED OPERATING PRESSURE
Do not exceed the maximum operating pressure rating of the actuator.
3.2
Apply an operating media, of the correct pressure, through a control valve to the actuator's
power cylinder.
3
Installation, Operation and Maintenance Manual
121960 Rev. C
Actuator Power Operation
Advertisement
Table of Contents
