Table of Contents
Advertisement
Figure 2.4
Mounting the Transportable Memory Module on the
Controller
Step 6.
Install the Controller
Select a PCI Express slot and align the controller's PCI
Express bus connector to the slot. Press down gently but firmly
to ensure that the card is properly seated in the slot. Secure
the bracket to the computer chassis.
The following figure shows the installation of the ServeRAID
M5120 controller in a PCI Express slot.
Note:
Some PCI Express slots support PCI Express graphics
cards only. If a RAID controller is installed one of those
slots, the controller does not function.
Attention:
To avoid damage to the computer, always remove the
controller from the PCI Express slot before you relocate or
ship the computer.
Detailed Installation
Transportable
Memory Module
J5B1
3_01453-00
2-7
Advertisement
Table of Contents
