Verification - Avaya 8800 Technical Configuration Manual

3.2 Verification


With using the show command to view various VRF parameters, you can ether use the
VRF name or VRF ID.
3.2.1 VRF:
3.2.1.1 Verify VRF IP information: Interfaces, Routes and ARP Entries
Step 1 –Verify the IP addresses using CLI, i.e. for VRF 1
ERS8000-1:5# show ip interface vrf vrfone
or
ERS8000-1:5# show ip interface vrfids 1
Result:
================================================================================
================================================================================
INTERFACE
--------------------------------------------------------------------------------
Vlan600
Vlan601
Step 1 – Verify the IP address using JDM, i.e. assuming Super User for VRF 1
Go to:
1. IP -> VRF -> Id 1 (vrfone) -> Set Currect VRF
2. IP -> IP – vrfone (vrf 1) -> Addresses.
Result:
VRF-Lite for Ethernet Routing Switch 8600 Technical Configuration Guide
April 2011
IP Interface - VRF vrfone
IP NET
ADDRESS MASK
10.1.10.1 255.255.255.0
10.1.11.1 255.255.255.0
BCASTADDR REASM VLAN
FORMAT MAXSIZE ID
ones 1500 --
ones 1500 --
avaya.com
BROUTER
PORT
false
false
40