Avaya 8800 Technical Configuration Manual page 20

Vrf-lite for ethernet routing switch
Table of Contents

Advertisement

EDM (release ≥ 7.0) Step 1 – Create VRF instance. After you have created the VLAN(s), via
Configuration ->VLAN -> VLANs -> Basic (go to the corresponding VLAN id, click on Vrfid and
enter the VRF ID you wish to use for this VLAN
2.3.2 VRF Context – User access to VRF context using SNMP / WEB Browser
Depending of the software release used, you can change the way a user can access VRF context.
In software release 5.x, SNMP is used to access a specific VRF instance or instances.
In software release 7.0, when logging into EDM, in addition to entering a user name and
password, you will also have to enter a VRF Name. By default, a VRF name of GlobalRouter is
used to access the Global Router view.
In software release 7.1, when logging into EDM the user is only offered the Global Router view. A
user can select a specific VRF where a new browser tab will be opened for the selected VRF
view. A user can choose to view and manipulate the different VRF view simultaneously.
2.3.2.1
JDM : VRF-Lite SNMP Access for ERS 8600 software release 5.x
As mentioned above, SNMP (release 5.x) can be used to allow 3
VRF instance or instances. Please note that only SNMP can be used to visualize management access at
a VRF level; CLI access at a VRF level is not supported at this time.
If you wish to enable SNMP at a VRF level, both SMNPv1/2 and SNMPv3 can be used. SNMPv3 access
control at a VRF level is accomplished using the USM model. If SNMPv1/2 is used, access is controlled
via community strings.
Overall, there are two types of users supported with VRF-light, Super Users and VRF users.
Super User
Has full access to switch using ether JDM or CLI
Has access to global route (GRT) and each VRF instance
o
The Super User must either select Global Router instance or a specific VRF instance
Configures all VLAN‟s (global and VRF) and assign‟s initial IP address for each VRF via the
Global Router instance
The Super User must ether select the Global Router instance or a VRF instance
o
Cannot select both at the same time
VRF-Lite for Ethernet Routing Switch 8600 Technical Configuration Guide
April 2011
rd
party or partner access to a specific
avaya.com
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

8600

Table of Contents