Avaya 8800 Technical Configuration Manual page 21

o
If a VRF instance is selected, only the VFP specific fields and parameters will be
configurable and displayed
o
The Super User must select Global Router instance initially to configure the VRF
instances, VRF VLAN(s), and routing protocols allowed for each VRF instance


VRF User

Has access only at a VRF level

SMNP access only

VRF access level is configured by the Super User

SNMPv3 support via USM model

SNMPv1/2 support via community string
o
Default: public::x and private::x where x = 1 to 255 (VRF instance)

Only the Super User can add VLAN‟s, VRF instances

The VRF user can add IP addresses, routing protocols, and other IP parameters pertaining only
to the VLANs configured by the Super User.

The VRF user can only view routes, arp, MAC addresses, etc for the VLANs configured by the
Super User
SNMP Global Router and VRF Selection – Super User
2.3.2.1.1
Assuming you have already configured the VRF instance(s) and VRF VLAN(s), to select the VRF
instance using Java Device Manager (JDM), go to IP -> VRF, select the VRF instance, and then click on
Set Current VRF as shown below. From now on, only the fields pertaining to this VRF will be displayed.
ERS8600/8800 – VRF instance selection using Super User
VRF-Lite for Ethernet Routing Switch 8600 Technical Configuration Guide
April 2011
At this stage, either the Super User or a VRF User can be used to continue the
VRF configuration
If the Super User wishes to continue the VRF configuration, he/she must first
select the VRF instance.
avaya.com
21