1MRK 511 401-UUS A
Section 3
3.1
3.1.1
3.1.1.1
Bay control REC670 2.2 ANSI
Application manual
Configuration
Description of configuration REC670
Introduction
Description of configuration A30
The configuration of the IED is shown in Figure 2.
This configuration is used in single breaker arrangements with single or double busbar.
Control, measuring and interlocking is fully configured.
The following should be noted. The configuration is made with the binary input and
binary output boards in the basic delivery. In many cases this is sufficient, in other
cases, for example with full control of all apparatuses included, more IO cards are
required. Our proposal for a full version with control is to use two binary input
modules and one binary output module.
Section 3
Configuration
IP14799-1 v2
IP14800-1 v1
M15200-3 v7
53