Reject Incoming Call - SoftBank 708SC User Manual

Hide thumbs Also See for SoftBank 708SC:
Table of Contents

Advertisement

Ringtones
Specify ringtones for saved numbers by Phonebook entry or
Category ( P.5-4, 5-7). When no ringtone is set, 708SC rings
according to Profile Settings ( P.9-2).
Under following conditions, 708SC rings according to each
2
Mode; Secret Mode is set to Hide and Phonebook(contains
caller's number as an entry)'s Secret Mode is set to On.
Incoming call window
If caller sends Caller ID, phone number appears; if saved in
Phonebook, name appears. When an image is set in
Phonebook or Category, image also appears ( P.5-4, 5-7). If
caller hides Caller ID, Withheld appears.
Under following conditions, no name/image appears; Secret
Mode is set to Hide and Phonebook(contains caller's number
as an entry)'s Secret Mode is set to On.
Missed call window
After an unanswered incoming call, Missed call window
appears. Press w (View), to open Missed Call Log ( P.2-
9).
2-4
When you cannot answer a call
Use Call Forwarding/Voice Mail to forward incoming calls to a
specified number automatically/to save messages at Voice
Mail Center. When Call Forwarding or Voice Mail is set to No
reply, press o (Busy) to forward an incoming call
immediately ( P.16-3, 16-5).
Use Answer Machine to record caller messages. Up to 3
messages (15 seconds per message) can be recorded in
708SC ( P.2-5).

Reject Incoming Call

Proactively disconnect an incoming call without answering
it. The rejected call is recorded in Missed.
AWhile 708SC rings/vibrates, press
y

Advertisement

Table of Contents
loading

Table of Contents