If it is required to re‐pair SGR8210‐SMK (HANDSET) to another DECT base, please press
**6863* key on the handset. Then the handset will reset to factory default and reboot. It
shows "NO SUB" on the display after it boots up. Then please refer to "The first time pairing
to DECT base" steps.
Speed Dial Settings
There are four set of speed dials, which are SSP9210‐SM, SAX8210‐P, SGR8210‐SMK (BASE)
and SGR8210‐SMK (HANDSET). Each speed dial set contains different service numbers. There
are 10 service numbers on SSP9210‐SM and 6 service numbers on SAX8210‐P, SGR8210‐SMK
(BASE) and SGR8210‐SMK (HANDSET). The speed dials' number settings are all on the DECT
base. Meaning that speed dials of SAX8210‐P is configured on SSP9210‐SM and speed dials
of SGR8210‐SMK (HANDSET) is configured on SGR8210‐SMK (BASE). To configure speed dials
in detail, please see steps in this section.
SSP9210‐SM & SAX8210‐P
SSP9210‐SM
Please go to WUI Speed Dial after you login to Web configuration page of SSP9210‐SM.
Number field is the service number you want to dial and Display is the information shows on
the display after it is dialed. 10 speed dials from 1 to 10 maps to service keys as followings.
1. WAKE‐UP CALL
2. IN‐ROOM DINING
3. FRONT DESK
4. HOUSE KEEPING
5. BELL DESK
6. CONCIERGE
7. SHOW RESERVATIONS
8. DINNER RESERVATIONS
9. SPA
10. SALON
9