Registrations; Master (Ssp9210-Sm) - AEI SSP9210-SM Administrator's Manual

Registrations

AEI phones support BLA and the signaling is handled by phone itself. To handle BLA, there are
two phone types in the configurations. One is Master and the other is Slave. The identity to
synchronize between Master and Slave is the Room Number, which is configured at WUI
Global SIP Setting Other Settings, Room Number. In this project, AEI considers
SSP9210‐SM as Master and SGR8210‐SMK (BASE) as Slave. See the picture below. For
configuring Master and Slave on Web Configuration Page, please refer to Master and Slave
section below.
Master
To login Web configuration page (Mozilla Firefox), first you need to put SSP9210‐SM and
SGR8210‐SMK (BASE) in a DHCP network. By default, AEI phones are DHCP clients, meaning
that it will get an IP address from a DHCP server dynamically. Second, you can get IP
information by pressing *112*113 on the phone key pad. The IP address will show on the
LCD display of SSP9210‐SM. And SGR8210‐SMK (BASE) will pronounce its IP address once you
pressed the feature codes.
Master (SSP9210‐SM)
Please login to Web configuration page of SSP9210‐SM at
The Username and Password are admin and 1234 respectively.
SIP
SIP
Server
RTP
SIP
RTP
SIP
RTP
Slave
http://IP.Address.of.SSP9210‐SM:8000
4
.