Call Waiting Tone Repeat; Caller Id; Backup Sip Registration; Network Settings - AEI SSP9210-SM Administrator's Manual

Waiting Tone.
Call Waiting Tone Repeat
With Call Waiting Tone enable, the beep indication plays only one time. To repeat playing the
beep indication, please go to WUI Phone Settings Tone Setting, Call Waiting Tone
Repeat and enable it.
Caller ID
By default, Caller ID is set to disable. The display shows "Incoming Call..." without indicating
the caller ID of the calling party. To enable showing caller ID, please go to WUI Global SIP
Settings Other Settings, Caller ID.
Backup SIP Registration
To enable SSP9210‐SM or SGR8206‐SM supporting registration failover to second SIP server,
please go to WUI SIP Accounts, First SIP Account. Fill in the first and the second SIP
server's IP address or domain name in the "Registration Server" and Proxy Server"; make
sure they are separated by ";". With the setting, the phone will register to the second SIP
server if there is no response from the first SIP server.
Network Settings
In the project, both SSP9210‐SM and SGR8210‐SMK(BASE) are default to DHCP clients and
802.1X settings are pre‐configured from factory. To configure network settings, please go to
WUI Network LAN Settings.
Static IP
To configure the phone's network type to static IP, please check Static IP in the LAN Setting.
Fill in all items listed on the page and then click "Submit" at the bottom page.
13