Feature Codes; Phone Operations - AEI SSP9210-SM Administrator's Manual

example: ftp://10.0.10.11. And if the server is ftp or http and require a username and
password, please fill in the in Server Username and Server Password respectively.
Server File Path: If phones' firmware file is at root folder of the server, please fill in firmware
name without extension. If not, please fill in the file path plus firmware name without
extension, for example, /firmware/ssp9210.
Feature Codes
Here is Feature Codes reference table. It is useful while you're deploying phones.
Feature Codes
*112*111#
*112*112#
*112*113#
*112*114#
*112*600#
*112*601#
*112*810#
*112*811#
*112*812#
*112*814#
*112*815#
Phone Operations
With all configurations done on the phone, the SSP9210‐SM, SAX8210‐P, SGR8210‐SMK(BASE)
Description
Reset Factory Default
Firmware Information of SSP9210 or
SGR8206‐SMK(BASE)
IP address Information of SSP9210 or
SGR8206‐SMK(BASE)
MAC address Information
For Key layout, "HOLD", "MUTE", "Volume",
from left to right.
For Key layout, "HOLD", "SPEAKER",
"Volume", from left to right.
Enable DECT Pairing for the second DECT
Handset
Free All End Points and Enable DECT Pairing
PIN Code Information
Disable DECT Pairing
Base RFPI Information
SGR8210‐SMK(BASE)
SSP9210‐SM, SAX8206,
SGR8206‐SMK(Handset)
SSP9210‐SM, SAX8206
SGR8206‐SMK(BASE),
SGR8206‐SMK(Handset)
SGR8210‐SMK(BASE)
SGR8210‐SMK(BASE)
SGR8210‐SMK(BASE)
17
Applicable Model
SSP9210‐SM,
SSP9210‐SM
SGR8206‐SMK
SGR8206‐SMK
SSP9210‐SM,
SSP9210‐SM,
SSP9210‐SM
SSP9210‐SM,
SSP9210‐SM