Radio; Starting Procedure; Basic Operation - Pioneer SPH-DA230DAB Operation Manual

Menu Item
[TA Interrupt]*2
[TA OFF]
[DAB+RDS TA]
[RDS TA ONLY]
[Soft Link]*2
[On] [Off]
*1 This setting is available only when [Digital Radio] is selected as the source.
*2 Depending on the model used, this menu may not be displayed.
20
En
Description
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
Disables this function.
Receives current traffic information for DAB and
RDS (AN-DAB1 has priority) if available.
Receives current traffic information for only RDS
if available.
When HARD LINK is unsuccessful, tunes to
another ensemble that supports the similar
service component. If no alternative service
component can be found or reception remains
poor, this function will automatically switch to a
similar FM broadcast.
NOTES
• This setting is available only when [Service Follow] is
set to [On].
• Only available in areas where SOFT LINK function is
supported.
• The broadcast content of the switched channel may
differ from the content of the original channel.

Radio

Starting procedure

1
Press then touch .
2
Touch [Radio].
The Radio screen appears.

Basic operation

Radio screen
Recalls the preset channel stored to a key from memory.
Stores the current broadcast frequency to a key.
Displays the preset channel list.
Select an item on the list ([1] to [6]) to switch to the preset channel.
Selects the FM1, FM2, FM3, MW, or LW band.
Performs BSM (best stations memory) function (page 21).