Pioneer SPH-DA230DAB Operation Manual page 36

Menu Item Description
[Day] Turns the dimmer function to off.
[Night] Turns the dimmer function to on.
[Dimmer Duration] Adjust the time that the dimmer is turned on or off by
dragging the cursors or touching
You can use this function when [Dimmer Trigger] is set to
[Time].
TIPS
• Each touch of
forwards in the 15 minute width.
• When the cursors are placed on the same point, the dimmer
available time is 0 hours.
• When the cursor for off time setting is placed on the left end and
the cursor for on time setting is placed on the right end, the
dimmer available time is 0 hours.
• When the cursor for on time setting is placed on the left end and
the cursor for off time setting is placed on the right end, the
dimmer available time is 24 hours.
NOTE
The time display of the dimmer duration adjusting bar depends on
the clock display setting (page 42).
[Picture Adjustment]
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable
these functions, you must stop in a safe place and apply the handbrake.
To adjust following menu, touch
Menu Item Description
[Brightness] Adjust the black intensity.
[-24] to [+24]
[Contrast] Adjust the contrast.
[-24] to [+24]
[Colour]* Adjust the colour saturation.
[-24] to [+24]
[Hue]* Adjust the tone of colour (which colour is emphasised, red,
[-24] to [+24] or green).
[Dimmer] Adjust the brightness of the display.
[+1] to [+48]
36
En
or .
or moves the cursor backwards or
, , , to adjust.
Menu Item Description
[Temperature] Adjust the colour temperature, resulting in a better white
[-3] to [+3] balance.
* With some pictures, you cannot adjust [Hue] and [Colour].
NOTES
• The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's
headlights are off (daytime) and on (nighttime).
• [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer
Settings].
• [Dimmer] can be changed the setting or the time to switch it to on or off (page 35).
• The picture adjustment may not be available with some rear view cameras.
• The setting contents can be memorised separately.
[System Information]
Menu Item Description
[Firmware Information] Displaying the firmware version.