ATSG AXOD Update Handbook page 98

Technical Service Information
CHAIN COVER AND THRUST WASHERS
PRIOR TO OCTOBER 13, 1995
NUMBER 3 NUMBER 1
THRUST WASHER THRUST WASHER
REQUIRES THE BRONZE NO. 3 REQUIRES THE PLASTIC NO. 1
THRUST WASHER WITH TANGS ON THRUST WASHER WITH TABS THAT
THE OUTSIDE DIAMETER ARE NON-SYMETRICALLY LOCATED
PART NUMBER E6DZ-7G096-A PART NUMBER E6DZ-7G099-A
NO. 1 THRUST WASHER LOCATION
WITH NON-SYMETRICALLY LOCATED
HOLES FOR THRUST WASHER
NO. 3 THRUST WASHER
LOCATION WITH CAST
GROOVES FOR THRUST
WASHER RETENTION
Copyright © 2002 ATSG
Figure 85
AUTOMATIC TRANSMISSION SERVICE GROUP
98