Table of Contents
Advertisement
4. Open the small handle
outward to release it from the secured position. Then, open the other small handle
same instructions. Ensure that the small handles are in the fully open position.
Note: There are two marks on the microprocessor retainer. You must open the small handle marked
with
first and then you can open the other small handle marked with
Figure 128. Opening the handles
5. Gently press down the small handle
until it is in the fully open position.
Figure 129. Opening the microprocessor retainer
1
by gently pressing down the small handle. Then pull the small handle slightly
1
to open the microprocessor retainer. Pivot the retainer upward
2
.
.
Chapter 9
Installing or replacing hardware
by following the
167
Hide quick links:
Advertisement
Table of Contents
