Lenovo ThinkStation P410 Hardware Maintenance Manual page 157

4. To install a new card reader into the card-reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket. Press the new card reader downward until
it snaps into position.
Figure 96. Installing the card reader into the card-reader retaining bracket
5. Note the orientation of the new card reader and route the card reader cable into the cable clip. Hold
the clip on the card-reader retaining bracket to insert the new card reader into the card-reader slot in
the flex module. Ensure that the card reader snaps into position.
Figure 97. Installing the card reader in the flex module
.
Chapter 9 Installing or replacing hardware
149