Table of Contents
Advertisement
●
Antenna
To display the RF antenna mode, when this mode is Air, Auto Search begins searching from
channel 2 to channel 69. When this mode is Cable, Auto Search begins from channel 1 to
channel 125. After searching, all available channels are stored in the TV's memory,
●
Auto search
Auto Search will stop in three situations:
1. The TV does auto search and stores channels from VHF/UHF automatically.
2. All 68 channels (Air mode) or 125 channels (Cable mode) are occupied
3. You can manually stop the search process by pressing Vol+/Vol-.
In the above 3 situations, the search will stop automatically and the TV will return to the first
channel. In situation 3, the TV will also return to the Tune menu.
●
Name
To name channels, press Vol+/Vol- to select the input character position while using four
number buttons on the remote control to enter characters: 1: Capital English; 2: Arabic numbers
(0-9); 3: Special characters such as "#"; 4: Resuming "*" in unnamed status.
Note: There is a PC Setup menu for the Tune menu in PC signal source; there is no Tune menu
in AVS, Video, or YPbPr signal source.
Clock
● Clock
The current time can be input by pressing the number
buttons (0-9) and Vol+/Vol-.
● Antenna
To display RF antenna mode.
● Time/ Off Time
The function of Time/Off Time is only active when
Time/Off Time is on. Press the number buttons and Vol+/Vol- to adjust the time.
Press CH+/CH- to select the options in Clock mode: Time, Channel, and Off Time. Press
Vol+/Vol- to set the corresponding value.
1. Whenever the main power is turned off and back on, the clock displays "12:00AM". Use
Vol+/Vol- to switch between AM and PM and use numeric buttons to set the time.
2. Use Vol+/Vol- to set times in the On Mode between Off, Once and Always. Off indicates
this function is not available. Once indicates one time only operation for the On Mode. Always
indicates mode will be turned off afterwards automatically.
14
Advertisement
Table of Contents
