Table of Contents
Advertisement
●
CCD
Press CC to see the menu on the right. Select the desired option among CC1-CC4, T1-T4 and
OFF with CH+/CH-. Confirm your choice by pressing OK.
●
Favorites
Press FAVOR to see the menu on the right:
1. Mode including Auto and Manual. They are
respectively stored in Air or Cable mode
2. In Auto mode, the TV stores the channel name (if
any has been programmed) to Favorite Channels. It
will save the latest five available channel names.
3. In Manual mode select different sorting options
with CH+/CH-.
In Auto mode Vol+/Vol- are invalid while CH+/CH- and OK still function.
●
Recall
In TV mode, press RECALL on the remote control to view the previous channel.
In other signal sources, press RECALL on the remote control to view the previous signal source.
●
Input Signal Switch
Press SOURCE on the remote control to display the source menu and select the signal source.
Options are TV, AV, S-VIDEO, YPbPr and PC. Press CH+/CH- to select the different signal
source; Press Vol+ or OK to enter into the selected signal source. Press SOURCE again to
close the source menu.
●
Channel Changing
Use the number buttons to choose the desired channel directly or press CH+/CH- on the panel
or remote control to increase/decrease the channel number. If a channel number is in Skip On
mode, the next available channel will display.
A maximum of 3 digits can be keyed in at one time with the number buttons on the remote control.
The first input number is for hundreds, if it is "1", "1- -"appears on. The TV will switch to channel
1 if no more numbers are input within 3 seconds. The second is for tens if it is "2", "12 -"appears
on screen. The TV will switch to channel 12 if no more numbers are input in 3 seconds. The third
is for ones. Press OK to turn to the desired channel quickly after the corresponding number is
input.
Note: This function is only available in TV mode
17
Advertisement
Table of Contents
