Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Polaroid FLM-1512
Summary of Contents for Polaroid FLM-1512
- Page 1 15 ” LCD Television FLM-1512 20060216...
-
Page 2: Instruction Manual
Polaroid an American icon. Congratulations on your new Polaroid LCD TV purchase. To ensure your new LCD TV provides you with years of enjoyment, please read this guide carefully. -
Page 3: Important Safety Instructions
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the back of your LCD color television. -
Page 4: Fcc Warning
If this equipment does cause harmful interference to radio or TV reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. -
Page 5: Packing List
Please keep the original box and packaging for transporting the set in the future. GENERAL INFORMATION Radio Frequency input; supports CATV Capable of receiving cable programs in 470MHz, it can store 181 TV channels AV input Convenient for watching a DVD player, VCR, video camera or other playback devices. - Page 6 When used as PC display terminal without PC signal output, the LCD TV will automatically power off within 30 seconds and enter Power Energy Saving Mode. It will automatically start up again when it receives a signal from the PC. To start the TV manually with no signal press the number buttons or...
- Page 7 Front Panel The button names and functions are as follows: Panel buttons Button To switch between TV, AV, S-Video, YPbPr and PC signal sources. The same function as SOURCE on R/C (remote control) in menu SOURCE operation. To enter or quit from the OSD (On-Screen Display) menu.
- Page 8 Rear Panel Detail Illustration of Signal Input Ports...
-
Page 9: Remote Control
Remote Control Note: 1. When in operation, point the remote control directly at the infrared sensor. 2. Do not subject the remote control to impacts, water or disassembly. 3. When pressing the buttons on the remote control, allow an interval of no less than one second between selections. -
Page 10: Installation
5. Ensure that every AV signal cord is correctly connected to the corresponding jack. 6. Put the DC power plug in the DC input outlet of the TV, then plug the AC power plug of the power adapter in the AC power outlet. -
Page 11: Function Introduction
Use OK/Vol+ to enter the Equalizer submenu, you can increase or decrease the value of the sound output in different frequency ranges Note: The Sound menu options are the same in TV signal mode as well as in other signal source modes... - Page 12 MENU. See picture at right: Note: After a rating level has been set to B (Blocked) in TV RATING and MPAA RATING, the TV blocks other TV programs that contain content equal to or greater than the rating.
- Page 13 (c) After you exit from the Program Lock menu and switch to a locked channel, the picture and sound will be locked unless you input the correct password. The channel will remain unlocked until the TV is turned off. After the TV is turned on again, the password must be re-entered to view the locked channels again.
- Page 14 3. You can manually stop the search process by pressing Vol+/Vol-. In the above 3 situations, the search will stop automatically and the TV will return to the first channel. In situation 3, the TV will also return to the Tune menu.
- Page 15 3. If On Mode is in Once mode, this function is turned Off automatically. 4. When the TV is on and the values of On Time and Off Time are the same, only Off Time is valid. After the Once operation is done, this function is turned Off automatically. Always remains active.
-
Page 16: Other Functions
This sign is hidden when menu operation is entered, but MUTE still operates. The sign appears again when menu operation is exited. When there is no valid signal input, the TV will be mute (but no mute sign will show). 3. MTS The TV will identify MTS in channels automatically. - Page 17 A maximum of 3 digits can be keyed in at one time with the number buttons on the remote control. The first input number is for hundreds, if it is “1”, “1- -”appears on. The TV will switch to channel 1 if no more numbers are input within 3 seconds. The second is for tens if it is “2”, “12 -”appears on screen.
- Page 18 Timer On/Off is valid or Sleep is on Sleeps for power-saving; Activates again as PC sends a signal or any button on the remote control is pressed The indicator is flickering when the TV Flickering receives signal from the remote control SLEEP 30...
-
Page 19: Troubleshooting
Correction 1.Plug the power adapter in 2.Turn the power on Press to turn on the TV 1.Press or input the PC signal 2.Connect the signal cable properly 1.Adjust the value of Contrast, sharpness, and color 2.Set the Color system to the... -
Page 20: Specifications
Please note that this does not affect the performance of your LCD TV. For service, support and warranty information, visit 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443. "Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA. Specifications 15.0 inch...
Need help?
Do you have a question about the FLM-1512 and is the answer not in the manual?
Questions and answers