Panasonic KX-F910BX Service Manual page 12

2-1. MAINTENANCE LIST
.
NO. OPERATION
1 Document Path
2 Rollers
Recording Paper
3
Roller
Thermal Head
4
LED Array
5
Sensors
6
Mirrors and Lens
7
Abnormal, wear and
8
tear or loose parts
2-2. MAINTENANCE CYCLE
No. Items
Separation Roller
1
(Ref. No. 58)
Separation Rubber
2
(Ref. No. 23)
Feed Roller
3
(Ref. No. 49, 53)
Target Glass
4
(Ref. No. 171)
Thermal Head
5
(Ref. No. 59)
Recording Paper Roller
6
(Ref. No. 112)
Remove any foreign matter such as scrap of paper.
If a roller is dirty, clean it with a damp cloth, then let dry thoroughly.
If the platen is dirty, clean it with a damp cloth, then let dry thoroughly.
Remove the paper before cleaning.
If the thermal head is dirty, clean the printing surface with a cloth
moistened with denatured alcohol (alcohol without water), then let dry
thoroughly.
If the LED array is dirty, clean the glass with a dry soft cloth.
Confirm the operation of the following sensors: recording paper sensor
(SW273), Document sensor (PI302), Read position sensor (PI301),
Cover open sensor (SW271), and JAM sensor (SW272).
If the mirror and lens are dirty, clean them with a dry soft cloth.
Replace the part. Be sure that all part's screws are tight.
Cleaning
Cycle Procedure
3 months See P. 16.
3 months
– – – –
3 months See P. 16.
3 months See P. 16.
See P. 123.
3 months
See P. 121.
3 months
CHECK ITEM
Replacement
Cycle
7 years
(63,000 documents)
7 years
(63,000 documents)
7 years
(63,000 documents)
7 years
(63,000 documents)
7 years
(63,000 documents)
7 years
(63,000 documents)
These values are only standard ones and may vary depending on
usage conditions.
| 15 |
KX-F910BX
REMARKS
See page 16.
See page 121.
See page 123.
See page 16.
See pages 77, 78.
Remarks
Procedure
See page 120.
– – – –
See page 120.
– – – –
See page 123.
See page 121.