Table of Contents
Advertisement
KX-F910BX
Document
Feed Roller
Target Glass
Document
Feed Roller
Mirror
1. OUTLINE
MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS.
1) Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
2) Check for breakdowns
Look for signs of trouble and consider how the problems arose.
If the equipment can still be used, perform copying, self-testing or communications testing.
3) Check equipment
Perform copying, self testing and communications testing to determine if the problem originates from the transmitter,
receiver or the telephone line.
4) Determine causes
Determine the causes of the equipment trouble by troubleshooting.
5) Equipment repairs
Repair or replace the defective parts and take appropriate measures at this stage to ensure that the problem does not recur.
6) Confirm normal operation of the equipment
After completing the repairs, conduct copying, self testing and communications testing to confirm that the equipment operates
normally.
7) Record keeping
Make a record of the measures taken to rectify the problem for future reference.
COMPONENT LOCATIONS
Separation Roller
Lens
Transmission Motor
LED Array
MAINTENANCE ITEM
| 14 |
Recording Paper Cover
Recording Paper
Thermal Head
Recording Paper Roller
Reception Motor
Cutter
Advertisement
Table of Contents
