PIAGGIO X10 500ie Executive 2012 Owner's Manual page 90

Operating from both sides of the vehicle, unscrew and remove the screw «D».
03_35
Remove the front cover from the front.
03_36
Now it is possible to check and adjust the headlight if necessary.
Proceed as follows:
- Place the vehicle in running order and with the tyres inflated to the prescribed pres-
sure, on a flat surface 10 m (32.8 ft) away from a white screen in a shaded area,
making sure that the axis of the vehicle is perpendicular to the screen.
- Turn on the headlight and make sure that the limit of the light beam projected on the
screen does not exceed 9/10 of the height of the centre of the headlamp from the
ground and is no less than 7/10.
03_37
Otherwise, adjust the headlight:
•
The screw «E» adjusts the height of the right headlight.
90