Table of Contents
Advertisement
The travel is displayed only if the speed is greater than 5 km/h (3 mph), otherwise the
symbol «--.-» is displayed.
The average distance is also calculated with the vehicle stopped, but turned on. In the
case of resetting data with the «ODO/TRIP» button, the average travel will be indicated
after travelling at least 0.1 km (0.1 mi).
01_12
RESIDUAL AUTONOMY
The residual autonomy, indicated in «km» or «mi» according to the display settings,
is a calculated and estimated value.
Residual autonomy is estimated based on the average travel of the last three minutes,
therefore a better estimation of autonomy if riding at a constant speed is calculated.
01_13
From the lighting up of the reserve warning light, the residual autonomy value indicated
will be «---». Refuel as soon as possible.
MEASUREMENT UNIT
To change the measurement units used on the display, proceed as follows:
- insert the key and turn it to the «KEY ON» position;
- pressing and holding the «MODE» button the measurement units on the display start
flashing;
19
Advertisement
Table of Contents
