Velleman CAMTVI10 User Manual page 9

8.1 System

MFG: Max. 15 characters displayed.

PROTOCOL: Dome protocol.

DOME ID: Dome address.

COMM: In this example: 2400 (baud rate), N (check bit), 8 (data bit), 1 (start bit).

VERSION: The version will upgrade along with the device upgrading.

TEMPERATURE: Displays the internal temperature of the camera.
Remark
Protocol, ID and COMM can all be set in menu <COMM>.
8.2 Dome
8.2.1 Communication
<COMM>
------------------------------------------------
DEVICE ID
CHECK ID
TARGET ID
SOFT PROTOCOL
BAUD RATE
COMM RESET
SAVE
EXIT

DEVICE ID: Displays the camera ID.

CHECK ID: Distinguish several cameras with the same ID.

TARGET ID: Target ID available, ranging from 001 to 250.

SOFT PROTOCOL: Select auto, Pelco-D or Pelco-P.

BAUD RATE: Select the baud rate.

COMM RESET: Reboot the camera.

SAVE: Save the modifications. The camera will reboot after saving.
V. 02 – 18/07/2016
CAMTVI10
<SYSTEM>
-------------------------------------------------------
MFG
PROTOCOL
DOME ID
COMM
VERSION
TEMPERATURE
EXIT
<DOME>
-------------------------------------------------------
COMM
IR DISPLAY
GUARD TOURS
A-B SCAN
PAN SCAN
PARK ACTION
PRIVACY ZONE
ALARM
ADVANCED
EXIT
000000
001
AUTO
2400BPS
AUTO
2400.N.8.1
------------------------------------------------
RESET TO DIAL THE CODE
YES
EXIT
9
001
<COMM RESET>
©Velleman nv