Table of Contents
Advertisement
Power-Off Memory
The camera will automatically return to the status before the power interruption.
Park Action
The camera will automatically run a specific preset mode if it is not operated in the set time.
Multilanguage OSD Menu
The available on-screen languages are: English, German, Italian, French and Spanish.
Temperature Control
The camera checks the inner temperature so to manage the inner temperature.
7.2
Basic Operation
Dome Control
Control the joystick up, down, left or right.
Zoom
Press the ZOOM- or ZOOM+ button to minify or magnify the picture.
Focus
Press the FOCUS- or FOCUS+ button to manually adjust the focus.
Iris
Press the IRIS- or IRIS+ button to decrease or increase the image's brightness.
Preset Point
To set a preset point: press the PRESET button, then the number and finally ENTER.
To call a preset point: press the CALL button, then the number and finally ENTER.
To delete a preset point: press the CLEAR button, then the number and finally ENTER.
7.3
Special Preset Points
Following presets are predefined as special functions.
preset
33
34
35
36
79
80
81
82
83
84
switch on far light
85
switch on near light
Remark
Some of the above presets may not be available due to the protocol limits of the used control equipment.
7.4
On-Screen Display (OSD)
Call preset 95 to enter the OSD.
Up/down: move up/down the menu or increase/decrease the value.
Right: enter an option, select the item or confirm.
Left: return to the main menu or cancel.
Angle display: XXX.XX(pan)/XXX.XX(tilt).
ID display: lower-right corner of the screen.
Call preset 94 to exit the OSD.
V. 02 – 18/07/2016
function
pan scan 180°
reset
run wiper
stop wiper
digital zoom on
digital zoom off
auto day/night
night
day
CAMTVI10
preset
86
87
88
89
92
94
95
96
97
98
99
7
function
BLC on
BLC off
freeze on
freeze off
A-B scan
OSD off
OSD on
guard tour 3
guard tour 2
guard tour 1
pan scan
©Velleman nv
Advertisement
Table of Contents
