Advertisement
5. MAINTENANCE
5.1.
REPLACING THE BATTERY.
WARNING! To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery cover.
5.1.1. When the battery become exhausted or drop below the operating voltage, "BAT" will appear in the right-hand side of the
LCD display. The battery should be replaced.
5.1.2. Follow instructions for installing batteries. See the Battery Installation section of this manual (page 2).
Dispose of the old battery properly.
WARNING! To avoid electric shock, do not operate your meter until the battery cover is in place and fastened securely.
5.2.
Clean the multimeter's casing using a slightly dampened cloth and mild detergent - do not use any abrasives or solvents.
Clean the inside of each terminal using a swab soaked in isopropyl alcohol, use a new swab to apply a light coat of
machine oil to each terminal.
5.3.
If the multimeter is to be stored for a long period of time, remove the battery first to avoid any damage.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and
disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally
protective way.
WARNING! To avoid electric shock, disconnect the test leads from any
source of voltage before removing the battery cover.
Disconnect the test leads from the meter.
Open the battery cover by loosening the cover screw using a Phillips
head screwdriver (FIG.A below).
Lift the 9V battery from the meter and unclip from the battery socket.
Replace the battery cover back in place. Secure with the screw.
WARNING! To avoid electric shock, do not operate the meter until the
battery cover is in place and fastened securely.
Dispose of batteries according to local authority guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are
required to inform potential purchasers of products containing batteries (as defined within
these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Ltd
Environmental Protection.
Battery Removal.
FIG.A
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds,
Suffolk, IP32 7AR
Original Language Version
REMOVE
SCREW TO
ACCESS
BATTERY
01284 757500
01284 703534
TM105
Issue No: 2(I) - 17/06/14
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
