Preparing For Use; Using The Appliance - Philips FlexCare Platinum Connected Manual

12
English
- Not shown: Travel case
Note: The content of the box may vary based on the model
purchased.

Preparing for use

Attaching the brush head
1 Align the brush head so the bristles point in the same direction as
the front of the handle (Fig. 2).
2 Firmly press the brush head down onto the metal shaft until it
stops (Fig. 3).
Note: Philips Sonicare brush heads are imprinted with icons to easily
identify your brush head (Fig. 4).
Charging the appliance
1 Put the plug of the charger or sanitizer in a wall socket.
2 Place the handle on the charger.
The flashing light of the battery level indicator indicates that the
toothbrush is charging (Fig. 5).
Note: It takes at least 24 hours to fully charge the battery.

Using the appliance

Bluetooth connectivity
Before you start the connectivity procedure, make sure your mobile
device runs on Bluetooth 4.0 or higher.
Note: For the latest information on device compatibility, please
visit the App Store or Google Play.
Connecting your toothbrush
1 When used in connected mode, the Philips Sonicare App gives
you the opportunity to receive real time feedback on brushing,
store and share brushing data with your dentist (if you so choose),
and receive personalized coaching. If you wish to use the
toothbrush in an unconnected mode, the toothbrush will still
function. To use in connected mode, please follow the "connecting
your toothbrush" directions below.