Exterior Lights; Headlights; Daytime Running Lights (Drl) - If Equipped; High Beams - Jeep 2017 RENEGADE User Manual

EXTERIOR LIGHTS

Headlights

The headlight switch is located on the left
side of the instrument panel. The headlight
switch controls the operation of the head-
lights, side marker lights, daytime running
lights, fog lights and the dimming of the
instrument cluster and interior lighting.
Headlight Switch
32
Turning on the headlights will illuminate the
instrument cluster and the controls located
on the instrument panel.
Daytime Running Lights (DRL) — If
Equipped
The Daytime Running Lights (DRLs) will turn
on when the engine is started and remain on
unless the headlights are turned on or the
engine is shut off.
The DRLs will be disabled during turn signal
operation and resume operation when the
turn signal operation has ended.

High Beams

To turn on the high beam headlights, push
the turn signal lever forward (toward the front
of the vehicle) and an indicator will illumi-
nate in the cluster. To turn off the high
beams, pull the turn signal lever rearward
(toward the rear of the vehicle).
High Beam And Turn Signal Controls
NOTE:
The headlights must be on for the high beams
to activate.

Flash-To-Pass

You can signal another vehicle with your
headlights by lightly pulling the multifunc-
tion lever toward you. This will cause the
headlights to turn on at high beam and re-
main on until the lever is released.