Jeep 2017 RENEGADE User Manual page 42

Manual Climate Control Descriptions
Icon
MAX A/C Setting
MAX A/C sets the system for maximum cooling performance. Rotate the temperature control adjust knob counterclock-
wise to the MAX A/C setting. In MAX A/C, the blower speed and mode position can be adjusted to desired user settings.
A/C Button
Push this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged.
Recirculation Button
Push this control button to change the system between recirculation mode and outside air mode. Recirculation can be
used when outside conditions such as smoke, odors, dust, or high humidity are present.
NOTE:
• Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended
use of this mode is not recommended.
• The use of the Recirculation mode in cold or damp weather could cause windows to fog on the inside, because of
moisture buildup inside the vehicle. Select the outside air position for maximum defogging.
• Recirculation can be used in all modes except for Defrost.
• The A/C can be deselected manually without disturbing the mode control selection.
Front Defrost Mode
Air is directed through the windshield and side window demister outlets. Use this mode with maximum blower and
temperature settings for best windshield and side window defrosting.
NOTE:
The air conditioning compressor operates in Mix or Defrost, even if the Air Conditioning (A/C) button is not pushed.
This dehumidifies the air to help dry the windshield. To improve fuel economy, use these modes only when required.
40
Description