Clock Setting; Audio Setting; Radio Operation - Jeep 2017 RENEGADE User Manual

Clock Setting

1. Push the Menu button at the bottom of
the radio, and push the Enter/Browse but-
ton for System Settings. Next, select the
Time and Format setting and then select
Set Time by pushing the Enter/Browse
button.
2. Adjust the hours or minutes by turning the
Tune/Scroll knob, then pushing the Enter/
Browse button to move to the next entry.
You can also select 12hr or 24hr format
by turning the Tune/Scroll knob, then
pushing the Enter/Browse button on the
desired selection.
3. Once the time is set, press the "Back"
button to exit the time screen.
252

Audio Setting

• Push the MENU button on the radio face-
plate.
• The Audio Menu shows the following op-
tions for you to customize your audio
settings.
Treble, Mid, Bass, Fade, Balance, Speed Ad-
justed Volume, Loudness and AUX Offset
• Select the desired setting to adjust, then
push the ENTER/BROWSE button. Turn the
TUNE/SCROLL knob to adjust the setting +
or - . Push the "Back" button when done.

Radio Operation

Seek Up/Down Buttons
• Push the up or down button to seek through
radio stations in AM, FM or SXM bands.
• Hold either button to bypass stations with-
out stopping.
Store Radio Presets Manually
The presets are available for all Radio Modes,
and are activated by pushing any of the six
preset buttons. The Radio stores up to
18 presets in each of the Radio modes. Push
the A-B-C button on the faceplate to select
the A, B, or C preset list.
To store a radio preset manually, follow the
steps below:
1. Tune to the desired station.
2. Push and hold the desired numbered but-
ton for more than two seconds, or until
you hear a confirmation beep.