Selec-Terrain; Mode Selection Guide - Jeep 2017 RENEGADE User Manual

Active Drive With Low Control — (Trailhawk
Models Only)
Selec-Terrain Switch (Trailhawk)
The 4WD LOW mode helps to improve the
off-road performance in all modes. To enable
4WD Low, please follow the steps below:
164
Enabling 4WD LOW
With the vehicle stationary, the ignition in
RUN mode or with the engine running, shift
the transmission into NEUTRAL and push
the button once 4WD LOW. The instrument
cluster will display the message "4WD LOW"
once the shift is complete.
NOTE:
• Both LOCK and LOW LEDs will blink and
then become active on the Selec-Terrain
switch until the shift is complete.
• The instrument cluster display will illumi-
nate the "4WD Low" icon.
Disabling 4WD LOW
To disable the 4WD LOW mode, the vehicle
must be stationary and the transmission
shifted into NEUTRAL. Push the 4WD LOW
button once.

SELEC-TERRAIN

Selec-Terrain combines the capabilities of
the vehicle control systems, along with driver
input, to provide the best performance for all
terrains.

Mode Selection Guide

Rotate the Selec-Terrain knob to select the
desired mode.
Selec-Terrain Switch