Clock Setting; Audio Setting - Jeep 2017 RENEGADE User Manual

CAUTION!
Do NOT attach any object to the touchscreen,
doing so can result in damage to the touch-
screen.

Clock Setting

To start the clock setting procedure:
1. Push the MORE button on the faceplate.
2. Press the Settings button on the touch-
screen, then press the "Clock and Date"
button.
3. Press the "Set Time" button on the
touchscreen.
4. Press the "Up" or "Down" arrows to adjust
the hours or minutes, then select the
"AM" or "PM" button on the touchscreen.
You can also select 12hr or 24hr format by
pressing the desired button on the
touchscreen.
5. Once the time is set press the "Done"
button on the touchscreen to exit the time
screen.
NOTE:
In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock
display in the status bar on or off.

Audio Setting

1. Push the MORE button on the faceplate.
2. Press the "Settings" button on the
touchscreen.
3. Scroll down and press the "Audio" button
on the touchscreen to open the Audio
menu.
4. The Audio Menu shows the following op-
tions for you to customize your audio
settings.
Equalizer
Press the "Equalizer" button on the touch-
screen to adjust the Bass, Mid and Treble.
Use the "+" or "-" button on the touchscreen
to adjust the equalizer to your desired set-
tings.
Balance/Fade
Press the "Balance/Fade" button on the touch-
screen to adjust the sound from the speakers.
Use the arrow buttons on the touchscreen to
adjust the sound level from the front and rear or
right and left side speakers. Press the Center
"C" button on the touchscreen to reset the
balance and fade to the factory setting.
Speed Adjusted Volume — If Equipped
Press the "Speed Adjusted Volume" button
on the touchscreen to select between OFF, 1,
2 or 3. This will decrease the radio volume
relative to a decrease in vehicle speed.
Loudness — If Equipped
Press the "Loudness" button on the touch-
screen to select the Loudness feature. When
this feature is activated it improves sound
quality at lower volumes.
Surround Sound — If Equipped
Press the "Surround Sound" button on the
touchscreen, select On or Off followed by
pressing the back arrow button on the touch-
screen. When this feature is activated, it
provides simulated surround sound mode.
255