Logging Into Kdmdt - Kanguru KDFDT User Manual

2.4 Logging into KDMDT

After you have completed the Setup Wizard, anytime you run KDMDT you will be required to login
using your security password. You need to provide the correct security password in order to access the
Defender DualTrust's secure partition.
When the login screen appears:
1. Enter your password in the Password field.
2. Click on the Login button.
caution! If you enter your password incorrectly too many times in a row (seven is the default setting
but it may be different depending on your setup), for security purposes any data stored on the secure
partition will be erased. All secure browser data, including bookmarks, downloads, configuration, etc.,
will also be erased. You will be issued an on screen warning when you have one attempt remaining, to
prevent accidental erasure. To cancel the login process, click on the cancel button. Unplugging and then
reinserting your drive or manually running KDMDT again will bring the login window back.
Once you have successfully logged in to KDMDT, the secure partition will be accessible through My
Computer or Windows Explorer and the DualTrust secure browser will launch.
caution! Once you have logged into KDMDT, you should never disconnect your device without first
closing KDMDT properly by clicking the taskbar icon and selecting Unmount Kanguru Defender as
described in section 3.2 Removing Your Defender DualTrust on page 23.
resetting from the Login screen
In the event you have forgotten your password, you can use the Reset to Factory Default function to
reset your password. caution! Using the Reset to Factory Default function will format and wipe all
data off the device! All data on the device will be lost! All secure browser data, including bookmarks,
downloads, configuration, etc., will also be erased.
To reset your Defender DualTrust to the factory default:
1. Start KDMDT.
2. When the login screen appears, click on the reset button.
3. When you are prompted to confirm the reset, click on the Yes button.
4. When your password and data stored on the secure partition have been erased, click on the oK
button to complete the reset.
13
Logging into KDMDT